Vertiv VP7811B, Руководство пользователя, Страница: 61 / 79

Vertiv Intelligent Rack PDU Page 61
Figure 3-22 Target Page
•
Delay determines how long this Event must remain tripped for before this Action's first notification is
sent. This is different from the Trip Delay above. Trip Delay determines how long the threshold value
has to be exceeded before the Event itself is tripped. This delay determines how long the Event must
remain tripped before this Action occurs. Delay can be up to 14400 seconds (4 hours). A Delay of 0
will send the notification immediately.
•
Repeat detemines whether multiple notifications will be sent for this Event Action. Repeat notifications
are sent at the specified intervals until the Event is acknowledged, or until the Event is cleared and re-
set. The Repeat interval can be up to 14400 seconds (4 hours). A Repeat of 0 disables this feature,
and only one notification will be sent.
Then, click
Save to save this notification Action.
More than one Action can be set for an Alarm or Warning; to add multiple Actions, just click the Add icon
again and set each one as desired. Each alert can have up to 32 Actions associated with it.
To change an existing Alarm or Warning Event:
Click the Modify icon next to the Alarm or Warning Event you wish to change, then modify its settings as
above.
Figure 3-23 Modify Action Page
Once an Action has been added, each Action has its own checkbox in the "enabled" column at the far left.
The default is unchecked (disabled) when you first add each Action; set the checkbox to enable it. This
allows you to selectively turn different Actions on and off for testing.
To delete an existing Alarm or Warning Event:
Click the Delete icon next to the Alarm or Warning Event you wish to change, then click Delete to confirm.