Vertiv R48-2000C, Инструкция по установке и эксплуатации

Страница: 19 / 38

Vertiv | NetSure R48-2000C Outdoor Rectifier Installation & User Manual (UM1R482000C) | Rev. A 19
INSTALLATION
Installing the Rectifier
General
The rectifier can be pole mounted or secured to a suitable wall.
For mounting; use a corrosion inhibiting compound (CIC) inside the tapped mounting holes to keep
water away or use organically plated stainless steel bolts. See Figure 9 and Figure 14.
If the front door is opened during installation, ensure the front door is securely closed and the
screws are torqued to 29 Kgf cm (2.9 Nm) (25 in-lbs).
Pole Installation Procedure
1. Unpack the rectifier and mounting accessories.
2. Install the mounting bracket (big) in the appropriate top position on the pole with the supplied
pole mount band. Securely tighten the pole mount band to the pole. The pole mount band
accommodates poles from 6” to 12” in diameter. Refer to Figure 8.
3. Install mounting brackets to the rear panel of the rectifier with the supplied hardware. Refer to
Figure 9.
4. Secure the top of the rectifier to the pole by securing the mounting bracket (small) to the
mounting bracket (big) with the supplied M8 bolts. Refer to Figure 10.
5. Secure the bottom of the rectifier to the pole by securing the mounting bracket (big) to the pole
with the supplied pole mount band. Refer to Figure 11.
6. Secure the front side shield to the rectifier with the supplied M6 bolts. Refer to Figure 12.
Figure 8: Installing the Mounting Bracket to the Pole with the Pole Mount Band
Pole
Pole mount band
P/N 63126330
Mounting bracket (big)
P/N 63240BPY