Vertiv NetSure PSS12/2000-19B, Инструкция по установке и эксплуатации

Страница: 8 / 44

Vertiv
| NetXtend +12 VDC Bulk Output Power System Installation and User Manual (UM588706000) | Rev. H
vi
STATIC WARNING
This equipment contains static sensitive components. The warnings listed below must be observed to
prevent damage to these components. Disregarding any of these warnings may result in personal injury or
damage to the equipment.
1. Strictly adhere to the procedures provided in this document.
2. Before touching any equipment containing static sensitive components, discharge all static electricity from
yourself by wearing a wrist strap grounded through a one megohm resistor. Some wrist straps, such as Vertiv
Energy Systems Inc. Part Number 631810600, have a built-in one megohm resistor; no external resistor is
necessary. Read and follow wrist strap manufacturer’s instructions outlining use of a specific wrist strap.
3. Do not touch traces or components on equipment containing static sensitive components.
Handle equipment containing static sensitive components only by the edges that do not have connector
pads.
4. After removing equipment containing static sensitive components, place the equipment only on conductive
or anti-static material such as conductive foam, conductive plastic, or aluminum foil. Do not use ordinary
Styrofoam
™
or ordinary plastic.
5. Store and ship equipment containing static sensitive components only in static shielding containers.
6. If necessary to repair equipment containing static sensitive components, wear an appropriately grounded
wrist strap, work on a conductive surface, use a grounded soldering iron, and use grounded test equipment.