Vertiv NetSure HVT F02 CK1, Руководство пользователя

Страница: 31 / 62

Vertiv™ NetSure™ HVT F02 CK1 Power System User Manual
23
No Standards And Requirements Pass Notes
6 Cable wiring is covert Yes/No
7 Cable is wired with consideration of the wiring of other systems Yes/No
8 Cable pipe is laid in cable trenching Yes/No
9 Cable labels are clear and accurate Yes/No
10 Connector coat peeling is tidy and consistent Yes/No
11 Type O or U terminal is used for the connection of signal lines Yes/No
12 Cable lug is reasonably used in cable connection Yes/No
13 SPD earth, DC power earth and protective earth are connected correctly Yes/No
14 Leeway is left for the length of connection cable and the cable wiring is covert Yes/No
15 The cable lugs and cable connectors are well connected Yes/No
16 The screws in all cable connection points are firmly fixed Yes/No
17 The original environment is restored which has been destroyed due to the construction Yes/No
18 Scratch traces by marking pencils are left on the equipment Yes/No
19 The busbar connection on the rack top for connection of parallel cabinets is up to requirements Yes/No
20 The cables and cable trenching are level horizontally or vertically. Yes/No
21 Distances between line cable ties are equal and consistent Yes/No
22 Leeway is left in cable trenching Yes/No
23 Separation measures are taken in cross wiring Yes/No
24 Wiring is far from high temperature equipment and corrosive liquid pipe Yes/No
25 Wiring on wiring rack is in accordance with the original wiring style Yes/No
26 DC distribution branches and fuses are properly selected according to the corresponding loads Yes/No
27 Surplus parts of the cable ties are left uncut Yes/No
28 The placement of the equipment facilitates cabinet expansion and maintenance Yes/No
29 The cabinet assembly is well-fixed and quakeproof handled Yes/No
30 Paint and galvanized layer on the cabinet are not peeled Yes/No
31 No crumple or crack at the turning points of bus Yes/No