Vertical SBX IP 320, Руководство по установке

Страница: 101 / 148

SBX IP 320 Installation Guide
Chapter 9
Remote Diagnostics
The SBX IP 320 Remote Diagnostic Tool is a MS-Windows application program that may be
used with PC Admin program. This program is for diagnosing problems of the SBX IP 320
system and also maintaining the system from a remote site. This program can send and receive
the results of diagnostic commands of the SBX IP 320 system such as GSXD test, Board
configuration, S/W reset count, Station status, CO status, Station recovery, CO recovery,
Version display, Help message, and Log out.
Introduction
Hardware/Software Requirements
The system requirements for using this program are as follows:
SBX IP 320
• Serial Port that is installed on MPB as a basic option.
• LAN Port should be installed on MPB for LAN connection.
• Unique IP Address should be assigned for LAN connection.
• MODU that is installed on MPB.
PC
• Pentium Celeron 233MHz CPU or higher CPU
• 256 color Super VGA (800 x 600) or higher
• One or more Serial Port
• NIC (Network Interface Card) for LAN Connection.
• 2 button Mouse
• At least 32MB RAM
• MS-Windows 95/98/2000/me/XP/NT
• Enough hard drive space for installation