Vertical SBX IP 320, Руководство по установке

Страница: 128 / 148

[Commands] Menu 9
-
28
Chapter 9: Remote Diagnostics
SBX IP 320 Installation Guide
Monitor - COL Status
This command is used to show the status of a CO line connected to the SBX IP 320 system.
Conditions:
• This command can be executed when this program is connected to the SBX IP 320
system.
• If the [OK] button is clicked without entering a value in the [Enter Command Argument
Dialog], a message box displays to indicate "Empty field is not allowed".
• You can cancel the command by clicking the [X] button on the top right side of the [Enter
Command Argument Dialog].
• The length of the argument is limited to 6 characters.
• The argument is a physical port number that starts from 1.
• If a non-numeric value is entered, the SBX IP 320 system assumes it as the starting port
number.
• If an invalid value (or big value) is entered, the SBX IP 320 system handles the error.
Procedure:
Select [CO Status] sub-menu in [Commands] menu, or click [CO Status] [Command Bar]
button.
-or-
Input "c #" (# : Port Number) in the [SBX IP 320 Command Edit Box] and then click the
[Enter] button, or select [CO Status] in [Remote Command Combo Box] and then click
the [Execute] button.