Vertical SBX IP 320, Руководство по установке

Страница: 118 / 148

[Connection] Menu 9
-
18
Chapter 9: Remote Diagnostics
SBX IP 320 Installation Guide
LAN Connection with the SBX IP 320 System
For the LAN connection between PC and the SBX IP 320 system, there must be a physical
connection with 10BaseT cable to the local network.
Conditions:
• The SBX IP 320 system and PC must have valid IP addresses.
• If you want to connect directly, you have to use cross UTP cable. That means that the
[Transmit] and [Receive] are crossed. But you connect the SBX IP 320 system and PC
with a Hub, and you can use normal UTP cable that is used in your local network.
• If you want to connect from a different segment of the LAN or from an external site (via
Internet), the SBX IP 320 system must have a correct gateway address (default router). If
it does not have a gateway address, remote connection using TCP/IP is not possible.
• If you want to connect the SBX IP 320 system that is used in a remote site, you may need
help from the network administrator, because many sites use a firewall/NAT/PAT in their
router.
• In a remote connection using Internet, connection speed/stability is dependent on the
environment of WAN traffic or routing.