Vertex Standard VX-1210, Руководство по обслуживанию

Страница: 5 / 76

5
Operating Manual Reprint
O
PERATION
P
RELIMINARY
S
TEPS
1. Install a charged Battery Pack onto the transceiver, as de-
scribed previously.
2. Connect the
MH-50
B7A
Speaker/Microphone onto the trans-
ceiver; align the connec-
tor of the
MH-50
B7A
to
the connector on the left
side of the transceiver
body, then secure the con-
nector using the screws
supplied with the
MH-
50
B7A
Speaker/Micro-
phone.
3. If you use this transceiver with the optional
YA-30
antenna
kit, set up the YA-30 antenna first, then connect the coaxial
plug from the
YA-30
to the
ANT
jack of the transceiver.
ø : When using the
YA-30 dipole antenna, the built-in an-
tenna tuner is not used.
4. If you use this transceiver with the optional whip antenna
(
YHA-61
or
FHA-27
w/
GN-1210
), connect the whip antenna
onto the ANT jack of the transceiver, then connect a good
earth ground onto the
GND
terminal of the transceiver using
heavy braided cable.
Note : The
VX-1210
can be used either with a Dipole Antenna
(like the
YA-30
), or the whip antenna (like the
YHA-61
), de-
pending on the programming of the transceiver by your Vertex
Standard dealer. For further details, contact your Vertex Stan-
dard dealer.
W
HIP
A
NTENNA
S
ETUP
1. Connect the whip antenna (
YHA-61
or
FHA-27
w/
GN-1210
)
and earth ground to the transceiver, as described previously.
2. Press and hold in the
SEL
knob; while holding it in, turn the
transceiver on by rotating the POWER switch clockwise.
“
TU ADJ
” will appear in the display for three seconds, then
the display will return to indication of the channel. Once the
radio turns on, release the
SEL
knob. The built-in antenna
tuner is now engaged.
3. Now, press and hold in the
SEL
knob for 1/2 second to ini-
tiate antenna tuning.
4. Repeat step 3 on all operating channels.
5. Turn the transceiver off to save the new settings.
You may set up the whip antenna using the TOGGLE switch, if
your transceiver’s TOGGLE switch has been assigned to the
Antenna Tuning feature. See page 7 for details regarding An-
tenna Tuning.
ø : Requires Optional ATU-1210 Built-in Antenna Tuner and
YHA-61 Whip Antenna or FHA-27 Folding Whip Antenna
w/
GN-1210
Goose Neck.
Important Note!
r
If you use the
VX-1210
with the optional whip an-
tenna (
YHA-61
or
FHA-27
w/
GN-1210
), MUST BE
connect a good earth ground onto the GND terminal
of the VX-1210 using heavy braided cable to prevent
electrical shock and proper performance.
r
The optional whip antenna
YHA-61
is for use only
short distance communications. We recommend that
using with the optional whip antenna
FHA-27
w/
GN-
1210
, optional dipole antenna
YA-30
or other antenna
which having the antenna gain, if you wish to commu-
nicate with the faraway station.