VersaLogic Lion Скачать руководство пользователя | Manualshive

Страница: 48 / 56

background image

Thermal Considerations

41

Lion (VL-EPMe-42) Reference Manual

Thermal Specifications, Restrictions, and Conditions

Graphical test data is in the section titled EPMe-42 Thermal Characterization, beginning on page
42. Refer to that section for the details behind these specifications. These specifications are the
thermal limits for using the EPMe-42 with one of the defined thermal solutions.

Due to the unknown nature of the entire thermal system, or the performance requirement of the
application, VersaLogic cannot recommend a particular thermal solution. This information is
provided for user guidance in the design of their overall thermal system solution.

Table 26. Absolute Minimum and Maximum Air Temperatures

Board

With Heat Plate

With Heat Sink

(HDW-406)

With Heat Sink + Fan

(HDW-413)

VL-EPMe-42EAP

-40° to +85°C

-40° to +85°C

-40° to +85°C

VL-EPMe-42EBP

-40° to +85°C

-40° to +85°C

-40° to +85°C

VL-EPMe-42ECP

-40° to +85°C

-40° to +70°C

-40° to +85°C

Overall Restrictions and Conditions



Ranges shown assume less than 90% CPU utilization.



Keep the maximum CPU core temperature below 100ºC.



The ambient air surrounding the EPMe-42 needs to be maintained at 85ºC or below. This
includes the space between this CPU board and any board it is stacked on top of it.
Included is the space beneath an installed mini PCIe expansion board and the installed
SODIMM. A recommended overall air flow of 100 Linear Feet per Minute (LFM) / 0.5
Linear Meters per Second (LMS) addresses this requirement. If this air flow is not
provided, other means to keep the adjacent air at 85ºC or below must be implemented.

Heat Plate Only Restrictions and Conditions:



The heat plate must be kept below 90°C. This applies to a heat plate mounted directly to
another surface.

Heat Sink Only Considerations:



At 85°C air temperature and 90% CPU utilization, there will be little – if any – thermal
margin to a CPU core temperature of 100°C or the passive trip point (see test data). If this
is the use case, consider adding a fan or other additional air flow.

Heat Sink with Fan Considerations:



The heat sink and fan combination cools the CPU when it is running in high temperature
environments, or when the application software is heavily utilizing the CPU or video
circuitry. The fan assists in cooling the heat sink and provides additional air movement
within the system.



Integrator’s Note:

The ambient air surrounding the EPMe-42 needs to be maintained at 85ºC or below.

«
...
46
47
48
49
50
...
»

Содержание Lion

























































Отзывы:

Нет отзывов

Похожие инструкции для Lion

Бренд: MSI Страницы: 104

Бренд: IBASE Technology Страницы: 65

IMBA-BDE-1518-R10

Бренд: IEI Technology Страницы: 14

SUPER P4DPL-8GM

Бренд: Supero Страницы: 86

Бренд: Richtek Страницы: 15

TLE986 Evalboard Series

Бренд: Infineon Страницы: 20

Бренд: MSI Страницы: 32

SIDE POWER SRH 240 TC

Бренд: SLEIPNER MOTOR AS Страницы: 28

Бренд: EPOX Страницы: 55

Бренд: JETWAY Страницы: 55

LR100-N16 Series

Бренд: DFI Страницы: 126

Бренд: TOHATSU Страницы: 130

Бренд: Intel Страницы: 1

Бренд: Intel Страницы: 5

Бренд: Intel Страницы: 51

Бренд: Intel Страницы: 2

Бренд: Intel Страницы: 85

Бренд: Intel Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды