VersaLogic Lion Скачать руководство пользователя | Manualshive

Страница: 14 / 56

background image

Configuration and Setup

7

Lion (VL-EPMe-42) Reference Manual



Plug a USB CD-ROM drive, USB keyboard, and USB mouse into any of the USB
connectors at J3 and J4 of the paddleboard.



Plug the SATA data cable VL-CBR-0702 into one of the SATA connectors. Attach a hard
drive to the connector on the cable.



Optionally, attach a LAN cable to one of the Ethernet connectors on the Lion using the
VL-CBR-1604 dual RJ-45 adapter cable.

3. Install Thermal Solution



See Installing the VersaLogic Thermal Solutions later in this manual

4. Attach Power



Plug the power adapter cable VL-CBR-1205 into socket J19. Attach the motherboard
connector of the ATX power supply to the adapter.

5. Review Configuration



Before you power up the system, double-check all the connections. Make sure all cables
are oriented correctly and that there is adequate power to the VL-EPMe-42 and peripheral
devices.

6. Power On



Turn on the ATX power supply and the video monitor. The presence of a video signal
indicates proper configuration of the system.

7. Select a Boot Drive



During startup, press <CTRL> <B> to display the boot menu. Insert the OS installation CD
in the CD-ROM drive and select to boot from the CD-ROM drive.

8. Install Operating System



Install the operating system according to the instructions provided by the operating
system manufacturer. (See Operating System Installation.)

BIOS Setup Utility

Refer to the

BIOS Reference Manual

(available on the

Lion Support Page

) for information on

accessing and configuring settings in the BIOS Setup utility. The

BIOS Reference Manual

contains descriptions of all BIOS menus, submenus, and configuration options

.

Operating System Installation

The standard PC architecture used on the VL-EPMe-42 makes the installation and use of most of
the standard x86-based operating systems very simple. The operating systems listed on the

VersaLogic OS Compatibility Chart

use the standard installation procedures provided by the

maker of the OS. Special optimized hardware drivers for a particular OS, or a link to the drivers,
are available at the

Lion Product Support Page

«
...
12
13
14
15
16
...
»

Содержание Lion

























































Отзывы:

Нет отзывов

Похожие инструкции для Lion

Бренд: hager Страницы: 4

Бренд: Aaeon Страницы: 120

Бренд: Silicon Laboratories Страницы: 18

A320M-K PRO V14

Бренд: Colorful Страницы: 12

ECM-5716 Series

Бренд: Aaeon Страницы: 131

Бренд: JETWAY Страницы: 56

Бренд: Avalue Technology Страницы: 79

Бренд: ASROCK Rack Страницы: 83

Бренд: ECS Страницы: 74

Бренд: QDI Страницы: 58

Бренд: trimond Страницы: 43

Бренд: Atmel Страницы: 39

Бренд: Gigabyte Страницы: 37

Бренд: TYAN Страницы: 86

Бренд: Supero Страницы: 89

dsPICDEM MCHV-3

Бренд: Microchip Technology Страницы: 68

Бренд: Microchip Technology Страницы: 30

Бренд: SOYO Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды