20306746
29
WDV See-thru Gas Fireplace
FIREPLACE INSTALLATION
DANGER
HOT GLASS
WILL
CAUSE BURNS
.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Un panneau vitré chaud
peut
causer des brûlures.
Laissez refroidir le panneau
vitr
é
avant d’y toucher.
Ne laisser jamais
les enfants
toucher le panneau vitr
é
.
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
Une barrière visant à réduire le risque de brûlure
par le hublot chaude est fournie avec cet
appareil et doit être installé.
DANGER
WARNING
: The safety screen barrier
must be installed after the glass front is
in place. It is NOT a replacement for the
glass and the unit must
NOT
be oper
-
ated without the glass in place.
SAFETY BARRIER INSTALLATION
INSTRUCTIONS
1. Remove screen from packaging.
2. Align the four tabs on the sides of the screen frame
(two top, two bottom)
Figure 40
with the correspond-
ing slots on the firebox.
Figure 41
3. Slide the screen down into the slots until it fits secure
-
ly in place.
NOTICE
: It is the responsibility of the installer to ensure
the barrier is affixed to the fireplace at the time of instal
-
lation.
CERTIFIED
S
AFETY
B
ARRIER
NOTE:
A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and shall be installed for the protection of
children and other at risk individuals. If the barrier
becomes damaged, the barrier shall be replaced with
the manufacturer's barrier for this appliance.* Any
safety screen, guard, or barrier removed for servicing
the appliance must be replaced prior to operating the
appliance.
* See parts list for model number.
Figure 40 -
Barrier Screen Install
Figure 41 -
Screen Slot Placement
Slots (Qty: 4.
Two per side)
Slot
