RFS INSTALLATION INSTRUCTIONS
VERIZON HYBRIFLEX CABLE| Revision 1 | APRIL 2019
Visit
for the most current product specifications
Page 13 of 33
HYBRIFLEX Bending
Minimum Bending Radius
•
Minimum bend radius is the tightest bend an installer can bend a section of the cable without causing
performance degradation and / or damage.
Refer to spec sheet for specific hybrid cable bend radius.
RFS specifies two types of minimum bending radius for a cable:
•
Single bend – irreversible minimum bend section of the cable
•
Repeated bend – reversible minimum bend section of the cable
HYBRIFLEX Bending
Repeated bend radius, can be
reversed without damage or cable loss.
For single bend radius, DO NOT reverses.
Doing so will damage and increase cable loss
