Pub# OM22-iScan EC-OM
Figures 6 and 7.
Step 4. Complete module mounting.
Attach four cross bolts to secure iScan module to
toolbar mounting bracket. (Figure 6) Tighten securely. Attach V-Sense Controller to mounting
plate. (Figure 7) Multiple positions are provided to clear existing hoses and cables.
Step 5. Attach V-Sense cables and 12V power.
Attach cables to controller (refer to Electronics
overview and Setup section). Attach power cable to
12V power source. Route all cables carefully and
secure to prevent damage.
Figure 8.
Step 6. iScan removal.
Reverse installation process
described above. After V-Sense Controller and four bolts
attaching iScan module mounting plate to toolbar mounting
bracket have been removed, attach strap or chain to lift point
and raise module from toolbar mounting bracket. If the
mounting bracket and mounting plate do not separate, press
down on closing wheels to shift weight of module and free it
from mounting bracket (Figure 9). Do not loosen U bolts or
remove toolbar mounting bracket until iScan module has been
completely removed.
Figure 9.
Figure 8
Stand clear to avoid injury
3-3
