Pub# OM22-iScan EC-OM
2-2
V-Sense Controller and cables will be attached to iScan module AFTER iScan module is attached to
toolbar.
After the V-Sense Controller is mounted on the iScan it can remain on the implement due to
weatherproofing, unless opened by operator and lid seal is damaged. If the implement is stored outside for
long-term storage, remove Controller and store it indoors.
Figure 3 iScan EC-OM
Figure 4 V-Sense Controller
Figure 5 V-Sense Controller (rear)
Figure 6 V-Sense Controller (front)
On/Off
Turns power to
V-Sense
Controller
On/Off
3A Fuse
OM Comm
Serial communication to PC,
and external GPS input
12V Power
Power cord shipped with the unit that connects to
the available 12V system or optional battery pack
Power Indicator
Indicates when power to
the controller is on
Optic Power
Delivers power to
Optical sensor with
supplied cable
EC Signal
Bluetooth
Antenna
Depth Sensor
U3 pH Comm port (not
used on EC-OM units)
