Veris Industries GWNP Series, Руководство по установке

Страница: 1 / 10

Z207135-0C Page 1 of 10 ©2016 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 0916
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
Installation Guide
Air Quality
Product Overview
The GWNP Series wall mounted gas platform converts gas sensor readings into a signal that is compatible with
building control sensors. To operate, the GWNP must be used with a Veris AG Series gas sensor (sold separately).
The GWNP board has a connector for mounting a single AG sensor, and this sensor can be replaced at any time
without removing the GWNP from its installed location. Simply remove the GWNP cover, replace the AG sensor
inside, and reinstall the cover (see the installation guide for the AG sensor for more information). To maintain
accuracy, keep all vents free of dust and debris. The GWNP is warranted for a period of five years.
GWNP Series
BACnet and Modbus Protocol Communication
Wall Mounted Platform for Gas Sensors
Specifications
Input Power 15 to 30 Vdc/24 Vac ±20%, Class 2, 50/60Hz, max. 60 mA
Relay Contact Ratings 1 A/30 Vdc, Normally Open
Operating Temperature Range
-20 to 50 °C (-4 to 122 °F)
Operating Humidity Range 0 to 90% RH non-condensing
Terminal Block Wire Size 30 to 12 AWG (0.05 to 3.31 mm
2
)
Terminal Block Torque
0.37 to 0.44 ft-lb (0.5 to 0.6 N-m)
Protection Class (self-evaluated)
IP20
Agency Approvals Intertek ETL Listed to UL 61010-1
Note: The GWNP operates only when an AG Series gas sensor is installed (sold separately). Accuracy, sensitivity, setpoints, and measurement
range are dependant on the AG Series sensor connected to the GWNP platform. See the AGxx sensor installation guide for details.
Product Identification
GWN
P = Protocol: BACnet and Modbus
Output
X X
Dimensions
0.6”
(15 mm)
4.5”
(113 mm)
2.75”
(70 mm)
1.2”
(30 mm)
1.1”
(27 mm)
1.7”
(42 mm)
3.25”
(83 mm)
Example:
GWNPXXW
*
*The CE mark indicates RoHS2 compliance. Please refer to the CE Declaration of
Conformity for additional details.
Blank = Black
W = White
Housing
Color