VeriFone UX410, Руководство по установке

Страница: 15 / 35

S
ETUP
Connecting the Antenna Unit to the Controller Unit
UX 410 I
NSTALLATION
G
UIDE
15
Connecting the
Antenna Unit to
the Controller
Unit
Use the following cables to connect the Antenna Unit to the Controller Unit:
•
RJ45 to RJ45 (VPN CBL159-314-01-A)
•
SMA cable, 0.8 m (VPN CBL159-302-03-A)
Both connections are necessary for using the UX 410 to operate.
To connect units
1
Connect one end of the RJ45 plug to the rear of the Antenna and the other
end to the Controller Units.
2
Connect one end of the SMA connector to the ports of the Antenna and the
other end to the Controller Units.
Figure 7
Connecting the UX 410 Antenna to the Controller Unit
Contactless Support This Antenna Unit supports the global contactless program specifications from
American Express, MasterCard, Visa, Discover, ISIS SmartTap, and Google
Wallet with virtually no changes to existing payment hardware or software.
NOTE
For EMVCo L1 compliance, please use the provided cables.
SMA
SMA
RJ45
RJ45
X X
NOTE
To disconnect cables, use the same steps described above in reverse. If
exchanging cables, use a Verifone-approved cable. See Accessories and
Documentation for cable ordering information.