S
ETUP
Mounting the Antenna Unit
UX 410 I
NSTALLATION
G
UIDE
13
Removal Protection
The ARS detect any removal attempt and disables any PIN-related transaction.
Re-installation requires an authorized process. Please contact your Verifone
representative for details.
System Mode
Activation
The Service Switch gives administrators System Mode access for the Controller
Unit. To enter System mode, press the service switch for approximately 3 seconds
and release.
Use only if you have the proper authorization and equipment to open system
mode. Please contact your Verifone representative for details.
Mounting the
Antenna Unit
The UX 410 Antenna Unit is designed to be front mounted to an installation panel,
without further need for any external mounting devices.
To mount the UX 410
Antenna Unit
1
Remove the clear protective film from the back of the unit.
2
Align the unit’s stud bolts with the stud holes of the installation panel.
Figure 5
Mounting the UX 410 Antenna Unit
CAUTION
Make sure the installation method does not invalidate the Anti-Removal Switch
(ARS) function.
Do not,
for instance, install the Controller Unit in a sub-chassis
that can be removed from the main cabinet.
CAUTION
For optimal installation, the thickness of the installation panel should be
approximately 2 mm.
NOTE
Your mounting surface may have different installation instructions. Refer to your
mounting device’s user guide for further instructions.
