Vantage 5000
1.4v-09.2019
33 | Page
Figure 29 Passcodes Request OFF
7.7.2 Users / Passcodes Setup
To access the users/passcodes menu, touch the icon
as indicated in
Figure 8
, item 4.
1. PASSCODE REQUEST – enables the access control
settings. When selected ON, an ADMIN passcode must be
set. A keypad will appear as per
Figure 30
. If it is selected
OFF, all access control will be disabled.
If the passcode request is set to OFF, the user will be
prompted to confirm as per
Figure 31:
2. ACCEPT
– accepts all changes within the Job File.
Changes made on this screen are not saved until this icon
is pressed.
3. GO BACK/CANCEL – cancels any changes and return to
the Job File Menu. If the user has made changes, there
will be a prompt asking the user if the changes should be
saved.
4. HOME – returns the user to the Home Screen. If the user
has made changes, there will be a prompt asking if the
changes should be saved.
3
4
1
2
Figure 30 Passcodes Request ON
Figure 31 Reset/Clear Passcodes
