Vantage 5000
1.4v-09.2019
26 | Page
1. REAL TIME CLOCK MODE (RTC) – enables the clock
function which lets you schedule dosing functions. If it is
switched ON, more parameters will be enabled. If this is
switched OFF, the parameters will be ‘greyed out’.
The RTC works by using the pump’s time and date to trigger
the start signal for the pump. It is the user’s responsibility to
ensure the date and time is set correctly. (
g
7.6 Settings)
2. START TIME – to set the time to start the Job File. The user
can only enter one time.
3. DAY SELECT (ALL) – set all days or none for RTC start.
4. DAYS SELECT (SPECIFIC DAYS) – select individual days
for RTC start.
5. WEEKLY REPEAT – set weekly repeat ON or OFF as
required.
Once the set up is complete, the user must press the
START button on the front of the pump to start the dose/
batch mode RTC start. The STOP button can be pressed
at any time in which case the pump would no longer start
at the allocated time, and will not resume until the START
button is pressed again.
6
7
8
2
4
1
3
Figure 18 Editing the Job File - RTC Setup
7.4.4 Real Time Clock Mode (RTC) Setup
5
6. ACCEPT
– accepts all changes within the selected Job
File. Changes made on this screen are not saved until this
icon is pressed.
7. GO BACK/CANCEL – cancels any changes and return to
the Job File Menu. If the user has made changes, there
will be a prompt asking the user if the changes should be
saved.
8. HOME – returns the user to the Home Screen. If the user
has made changes, there will be a prompt asking if the
changes should be saved.
