Ventis ME150, Инструкция по установке и эксплуатации

Страница: 12 / 32

12
ME150 - Installation and Operation Manual
7. Deviations should be avoided whenever possible, especially the most pronounced. Each deviation adds
some restriction to the chimney system and may lead to draft problems.
Offsets of 30 degrees are
allowed in the United-States and up to 45 degrees in Canada.
8. If the chimney extends higher than 5 ft. (1.5 m) above its point of contact with the roof, it must be
secured using a roof brace.
9. A rain cap must be installed on top of the chimney. Failure to install a rain cap may cause corrosion
problems.
10. Cut and frame square holes in all floors, ceilings, and roof that the chimney will go through to provide a
2" (51 mm) minimum clearance between the chimney and any combustible materials. Do not fill this 2
″
space with insulation or any other combustible material.
11. Portions of the chimney which may extend through accessible spaces up to the ceiling must be enclosed
to avoid contact with combustible materials or damage the chimney.
12. For installations where more than one chimney is located in the same non-chase or within the same
area, we suggest that their terminations be separated by at least 16" (410 mm) horizontally, and 18"
(457 mm) vertically. This separation is to prevent smoke migrating from one chimney to another.