Ventis ME150, Инструкция по установке и эксплуатации

Страница: 10 / 32

10
ME150 - Installation and Operation Manual
3 VENTING SYSTEM
3.1 General Information
The venting system is the engine that drives your wood heating system. Even the best fireplace will not
function safely and efficiently as intended if not connected to a suitable chimney. The heat in the flue gases
that pass from the fireplace to the chimney is not wasted heat. This heat is what the chimney uses to make
the draft that draws in combustion air and keeps the combustion gases within the fireplace. You can think
of heat in the flue gas as the fuel the chimney uses to make draft.
3.2 Suitable Chimney
This wood fireplace may be connected to a factory-built metal chimney. To be suitable, a factory-built metal
chimney must comply with UL 103HT (U.S.A.), ULC S629 (Canada), ULC S604 (Canada). Factory-built
chimneys are tested as a system with all the necessary components for installation. The instructions
provided with the chimney by its manufacturer are the only reliable source of installation guidelines. To be
safe and effective, the chimney must be installed exactly in accordance with the manufacturer’s
instructions.
Use only components intended for the brand and model of chimney you are using. Never
substitute parts from other chimney brands or build your own components.
This wood fireplace is to be connected to a chimney with a 7" diameter flue passage.
TABLE 1 - LISTED CHIMNEY VENTIS FOR YOUR ME150 WOOD FIREPLACE
CHIMNEY
MANUFACTURER
BRAND TYPE INNER DIAMETER
Olympia Chimney Ventis 1" Solid Pack 7" (178 mm)
WARNING: THE CHIMNEY MUST START WITH A 7'' DIAMETER ANCHOR PLATE SECURED TO THE
FIREPLACE.
CAUTION: IF THE FLUE OUTLET IS CUT ONLY AROUND THE HOOKS, MAKE SURE THAT THE FLUE
DAMPER MECHANISM WORKS PROPERLY BEFORE CLOSING THE WALLS.