SECTION 8
Repacking
FAILURE TO USE CONSUMABLES DESIGNED FOR THIS UNIT WILL CAUSE DAMAGE TO BOTH UNIT AND
DISC THEREBY VOIDING YOUR WARRANTY. FOR AUTHORIzED DISTRIBUTORS VISIT WWW.VENMILL.COM.
REPACKING:
Remove the Buffing Pads and the Center Hub
1.
from the inside of the VMI Hybrid.
Remove the Water and the Buffing Solution
2.
Bottles from the inside of the VMI Hybrid.
Wipe any excess Buffing Solution and/or
3.
Water, from the corresponding tubes, with a
paper towel
Drain
both
the
Water
and
4.
the
Buffing
Solution
tubing.
Note: For the Buffing Solution line, fill the
Water Bottle with hot water. Place the Buffing
Solution tubing into the hot water. Press the
“C” button on the front User Keypad. Make
sure to have a small container ready to catch
the draining Buffing Solution. Wait until all the
Buffing Solution is drained from the tubing. You
will know when this happens, since water will
come out of the nozzles. Press the “C” button
on the front User Keypad to stop the drainage.
Remove the Buffing Solution tubing from
the warm water. Press the “C” button on the
front User Keypad to drain out the remaining
water from the Buffing Solution tubing. Once
the water is removed from the tubing, press
the “C” button on the User Keypad to stop
the drainage. Make sure to apply the two Jet
Nozzle Caps on the front Buffing Solution
Nozzle Tips and to apply the one Cap on
the back end of the Buffing Solution tubing.
For the Water line, press the “W” button on
the front User Keypad. Have a small container
ready to catch the draining water. Once all
the water has been drained, press the “W” on
the front User Keypad to stop the drainage.
19
