Take the new Center Hub and line up the
4.
Hex shaped opening on the hub with the
Hex shaped post.
Push the Center Hub in, as far as it can go.
5.
Spin the Center Hub by hand to make sure
6.
the hub is centered.
If needed, make the proper adjustment.
7.
If you are replacing the Center Hub due to
8.
the “RC” message, then there are no other
steps that need to be performed.
If you are replacing the Center Hub due
9.
to the “CP” message, make sure to also
replace the Buffing Pads, and then press
the “Regular” and then the “Blu-ray”
buttons on the User Keypad to notify the
unit that both the Buffing Pads and the
Center Hub have been replaced.
Resume normal operation.
10.
SECTION 7
Replacing Consumables
17
