Replacing Consumables
SECTION 7
FAILURE TO USE CONSUMABLES DESIGNED FOR THIS UNIT WILL CAUSE DAMAGE TO BOTH UNIT AND
DISC THEREBY VOIDING YOUR WARRANTY. FOR AUTHORIzED DISTRIBUTORS VISIT WWW.VENMILL.COM.
16
WARNING: BEFORE INSTALLING THE
4.
NEW BOTTLE OF BUFFING SOLUTION IT
IS ESSENTIAL TO SHAKE THE BUFFING
SOLUTION BOTTLE WELL!
Once mixed,
remove the safety seal from the bottle
by unscrewing the bottle cap. Once the
safety seal has been removed, reattach the
bottle cap, and then proceed to feed the
designated buffing solution tubing through
the cap.
NOTE: ONLY ONE OF THE TWO
BOTTLES OF BUFFING SOLUTION CONTAINS
A CAP WITH AN OPENING FOR THE TUBING.
THIS CAP MUST BE SAVED FOR REUSE!
CAUTION: MAKE SURE THE TUBING REACHES
5.
THE BOTTOM OF THE BOTTLE AND MAKE
SURE NOT TO PINCH THE TUBING!
NOTE: PLEASE KEEP THE SHIPPING CAP AND
6.
SAFETY SEAL! SHOULD THE MACHINE NEED
TO COME IN FOR SERVICING, THE BUFFING
SOLUTION BOTTLE MUST BE REMOVED. TO
ENSURE THAT THE COMPOUND DOES NOT CURE YOU WILL NEED TO MAKE SURE
THAT THE BOTTLE IS SEALED AND CAPPED.
Now that the Buffing Solution has been replaced, proceed by closing the Back
7.
Panel Door.
Press the “Regular” and then the “Blu-ray” buttons on the User Keypad to notify
8.
the unit that the Buffing Solution has been replaced.
Resume normal operation.
9.
D. How to Replace the Center Hub
(The Center Hub must be replaced at the same time as the Buffing Pads “CP”!)
Make sure the Top Cover is in the “Open” position.
1.
Locate the Center Hub, positioned between the two Buffing Pad Holders.
2.
Pull the worn Center Hub off of the Hex shaped post with your Index Finger
3.
and Thumb.
