MA-SE-DCT3-01-02 Manual Doge CT3 eng rev2
Rev.4 Pagina 6 di 17
Programming of the remote control
(optional): the control panel accepts pulse-commands (from open line with a pulse towards
ground) on the two lines of the remote control connector. Command of total arming on line 1, commando of partial arming on line
2. A pulse of at least 1 second on any of the two lines causes the switching off of the control panel.
Connect the cables to the terminal board of the receiver -12V BLACK, +12V RED, OUT4 BLUE, OUT3 WHITE as on the picture 10.
Memorize the first pushbutton of the remote control on OUT3 and the second on OUT4 (the open collector outputs of the Vela
receiver). Program the two outputs as mono-stable.
Two pushbuttons and two relays of Vela remain free: they can be used maybe to command a silent alarm connecting the relays to
the line of a telephone dialer.
(chart 5) Remote control
Push button
System status
A
Total arming
B
Partial arming
A and B
At armed system, it switches it off
Pict. 9
Connection with key line
Pict. 10
Connection with receiver Vela remote control
Pict. 11
Connection with Minidoge or Minimurano.
Remote LED (not given) for indicating Anomaly and Alarm
RECEIVER VELA
RECEIVER VELA
CONN. J5
Button A
Button B
