Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 8 of 42
2 SERVICE MODE
In the service mode, information such as sales by selection, total sales, total cash flow
through the machine, and diagnostic error codes can be accessed by using the selection
buttons and the electronic display. In addition, storage column assignments and vend
pricing can be set in this mode using the same techniques. The service mode can only be
entered when the vendor door is open and when the service mode switch is activated
(placed in the middle of the electronic board).
To step through the various programming functions each of the selection switches is given
a specific function (see previous page)
After entry into the service mode the operator can select one of several routines to read
data registers or to program machine configuration information. This level is called the
code level. Each of these paths is identified by a service code. The codes for the various
paths are as follows.
ERROR ROUTINE Error routine
TUBES PAYOUT Coin Payout Routine (work only MDB)
TUBES FILLING
Tube Fill Routine (work only MDB)
VEND TEST
Test Vend Routine
PASS
Password required to access the protected menues
CASH COUNTER
Cash counter routine
SALE COUNTER
Sales counter routine
CASH PRICES SETTING Prices setting routine
KEY PRICES SETTING Prices setting cashless MDB (from V 0.21)
SPACE TO SALE
Spaces to sales setting routine
OPTION SETTING
Machine configuration setting routine
MDB SETTING
MDB related setting
LANGUAGE SETTING
Language selection
TIME SETTING
Time and data routine
LIGHT SETTING
Light control routine
REFRIGERATION
Refrigeration control routine (not used)
PAYMENT SETTING
Payment system
VEND INHIBITION
Daily vending inhibit period
AGE CONTROL Daily age control period
RETURN TO VEND
Return to unprotected menu
The password is the sequence of selection 4-2-3-1. (followed by 4). The purpose of this
password is to prevent accidental reprogramming by the operator.
P
R
O
T
E
C
T
E
D
M
E
N
U
E
S