background image

PART 1 - General information

 

7

INTENDED USE

The VENDLET may be used for moving clients to a lateral, prone, or supine position, 

from one side of the bed to the other, or, to reposition them further up in bed. The 

VENDLET may also be used in connection with mobilisation in and out of bed and 

when transferring clients from one bed to another.

The VENDLET protect the caregiver from physical strain and heavy lifting in connec-

tion with the handling of immobile clients. Clients are turned/handled by pressing a 

hand control whereby the caregiver may support a  client and ensure their correct 

and comfortable positioning. This provides room for increased awareness in the care, 

which boosts employee job satisfaction and client well-being.

To the client, the turning process becomes uniform and steady as the sheet 

supports the body over its full length. 

The target group is clients who are being cared for, dressed, washed etc. in bed. This 

will often be clients who are lifted in and out of bed or clients who are mobilised 

using a standing aid. Hence, the user will typically be clients with few physical and/or 

cognitive resources and palliative clients.

The VENDLET is also suitable for clients at risk of developing pressure ulcers in that 

the uniform and steady transfer in the sheet minimises friction and the associated 

shear that can damage the tissue and cause pressure ulcers. Furthermore, the 

VENDLETs often seem to have a positive effect on clients suffering from spatial aware-

ness.

The VENDLET is intended for clients weighing at least 40 kg. 

VENDLET V5S / VENDLET V5S Speed Adjust has a load capacity of max. 200 kg. 

 

VENDLET V5S+ / VENDLET V5S+ Speed Adjust has a load capacity of 400 kg. The target 

group for these is bedridden bariatric clients / patients.

For safety reasons, the clients should not operate VENDLET.

Prior to the first use of the VENDLET, it is important to assess whether the VENDLET is 

suitable for the client in question. It may be necessary to take special precautions, for 

example if a client is very restless in bed.

Speed regulation   

 

 

 

 

 

38

Battery backup 

 

 

 

 

 

 

38

Under bed light 

 

 

 

 

 

 

38

Height restriction bracket   

 

 

 

 

41

Height restriction switch for Guldmann GB4   

 

 

41

Actuator turn fitting 

 

 

 

 

 

39

Bracket for Volker 3080 

 

 

 

 

 

39

Transport and mounting trolley 

 

 

 

 

39

FINAL INSPECTION CHECKLIST   

 

 

 

 

39

DISMOUNTING, STORAGE, AND REMOUNTING 

 

 

 

41

Dismounting 

 

 

 

 

 

 

41

Storage   

 

 

 

 

 

 

41

Remounting 

 

 

 

 

 

 

41

MAINTENANCE/CHECK   

 

 

 

 

 

42

Annual check 

 

 

 

 

 

 

42

Mechanical parts 

 

 

 

 

 

42

Sheets 

 

 

 

 

 

 

 

42

Functional test   

 

 

 

 

 

42

Electrical parts   

 

 

 

 

 

43

TROUBLESHOOTING 

 

 

 

 

 

 

44

REPAIRS  

 

 

 

 

 

 

 

46

Replacing the motor in a bar  

 

 

 

 

46

Replacing the actuator 

 

 

 

 

 

48

Replacing the velcro tape on a bar   

 

 

 

49

SPARE PARTS 

 

 

 

 

 

 

 

49

TECHNICAL DATA 

 

 

 

 

 

 

49

ENVIRONMENTAL CONSIDERATIONS AND DISPOSAL 

 

 

51

Environmental conditions   

 

 

 

 

51

Disposal   

 

 

 

 

 

 

51

Содержание V5S Speed Adjust




























Отзывы: