26
PART 2 - User manual
In this situation, you will have to slacken
the sheet that has been pulled askew and
pull it in again while guiding / smoothing it
with your hand.
Changing the turning sheet on an occupied
bed
1. Position the patient on his/her side
and then move him/her to the centre
of the bed.
2. Remove the old turning sheet from the
bar facing the back of the patient and
fold the sheet in layers with a width of
approx. 15 cm. Place it behind the back
of the patient.
3. Attach the new turning sheet to the
bar and press
or
button to roll
the new turning sheet onto the bar.
Allow approx. half of the new
turning sheet to roll onto the bar and
stop when the red line on the sheet is
at the centre of the mattress. Fold the
remaining part of the new turning
sheet in layers of 15 cm and place it
under the turning sheet being
replaced.
4. Move the patient to a supine position
on top of the folded new and old
turning sheets, and then on to the
opposite side by activating the bar
with the old turning sheet.
5. Remove the old turning sheet and
attach the replacement sheet to the
bar.
Fold the old turning sheet behind the back
of the patient
Place the new turning sheet under the
turning sheet being replaced
Remove the old turning sheet
Attach the new turning sheet to the
opposite bar
