Velux KLF 100, Руководство пользователя

Страница: 6 / 20

10 VELUX
ENGLISH
VELUX 11
ENGLISH
Back
INFORMATION
Language saved
Back
INFORMATION
Function saved
Enter Back
A B C D E F G H
Dansk
English
Deutsch
LANGuAGE
Enter Back
A B C D E F G H
Dansk
English
Deutsch
LANGuAGE
Enter Back
A B C D E F G H
Interface
Interface/repeater unit
Reset system
FuNCTION
Fitting
1
Remove cover.
2
Decide position of interface/repeater.
Note:
Check that the interface/re-
peater unit can operate the relevant
products from the chosen position
before final fixing.
3
Connect interface/repeater unit to
power supply. Do not replace cover
until the entire installation process is
completed.
The display appears automatically
when the mains power is switched on.
After a short time menu item
A
is
displayed.
A
Language
1
Press to highlight your language.
Press "Enter" to confirm your choice.
2
The display shows that the language has been saved.
After a short time menu item
B
is displayed.
B Function
The interface/repeater unit is used when products are to
be controlled with external control devices that are not
compatible, eg intelligent building installations, sensors
and standard wall switches.
1
Press to highlight "Interface/repeater unit".
Press "Enter" to confirm your choice.
2
The display shows that the function has been saved.
After a short time menu item
C
is displayed.
Note:
"Repeater" is used for extending the operation
range of remote controls in the system, see section
Function as repeater.
"Reset system" is used for deleting all settings and reset-
ting the interface to its factory setting.
Initial set-up