Velux KLF 100, Руководство пользователя

Страница: 17 / 20

32 VELUX
ENGLISH
VELUX 33
ENGLISH
C
C
H
Signal mode
The entries can be used in two ways:
Control of the functions / through signals on their
respective entries.
Control of the functions / through signals on one and
the same entry.
use of more than one entry
The functions / are controlled by their respective
entries.
OPEN/UP/ON is controlled by connecting C and .
CLOSE/DOWN/OFF is controlled by connecting C and .
STOP is controlled by connecting C with both and .
1
Press to highlight "Separate signals".
Press "Enter" to confirm your choice.
2
The display shows that the signal mode has been saved.
Note: This mode can also be used when you want to use
one of the functions / only, eg a rain sensor that only
closes the skylight.
System settings
use of one entry
The functions / / STOP are controlled by one and the
same entry. Each time the entry is activated, the function
will change.
For instance, ordinary electric light in buildings is contro-
lled from a wall switch that turns the light both on and off.
By choosing "Toggle signal", the interface/repeater unit is
set to change between -> STOP -> -> STOP -> ->
STOP -> etc each time the entry is activated.
-> STOP -> -> STOP -> -> STOP -> etc is contro-
lled by connecting C and :
1
Press to highlight "Toggle signal".
Press "Enter" to confirm your choice.
2
The display shows that the signal mode has been saved.
Note:
The products will travel in the reverse direction to
the latest activation no matter the control device. The
products will always travel to maximum top or bottom
position.
Back
INFORMATION
Signal mode
saved
Back
INFORMATION
Signal mode
saved
Enter Back
A B C D E F G H
Separate signals
Toggle signal
SIGNAL MODE
Enter Back
A B C D E F G H
Separate signals
Toggle signal
SIGNAL MODE
Enter Back
A B C D E F G H
Security key
Copy system
Signal mode
SySTEM SETTINGS