Velbus VMBKP, Руководство пользователя, Страница: 20 / 44

VMBKP
20
Velbus – Legen Heirweg 33, BE-9890 Gavere, Belgium – tel. +32 9 384 36 11 – e-mail: info@velbus.eu – www.velbus.eu PN-VMBKP-ed1-A4
REMARK:
While SUPER USER CODE # 7 is in operation to maintain the door unlocked, the functions that rely on the door sensor
(such as a magnetic contact)
5
and the User Codes for User Group 1 are all temporarily suspended until SUPER USER
CODE # 7 is entered again to release the door hold function.
The following are the temporarily suspended functions:
•
Door Auto- relock (see “ Door Auto Relock ” on p.40)
•
Door Forced Open Warning (see “ Door forced open warning (location 80) ” on p. 31)
•
Door Propped- up Warning (see “ Door propped-up warning (location 81) ” on p. 31)
•
Door Opening Alarm (see “ Egress mode, delay, warning beep and alarm (location 90) ” on p. 33)
•
All User Codes including the Super User Code for User Group 1
•
Duress Output activated by The Duress Code for User Group 1 (see “ DUR O/P (Duress Output) ” on p. 9)
Common user codes for User Groups 1 & 2 (locations 03 & 04)
The Common User Codes 1 and 2 are used for enhancing the security level of the User Group 1 and 2 channels
respectively. See Operation Mode 4 on p. 20
and “ Security level of the operation media ” on p. 13 for more information.
NOTE: a Common User Code alone can NOT operate the User Group channels directly.
Locations Common user code Validation
0 3 – 0 4 4 to 8 digits #
1. Locations
•
0 3 : location for the common user code for User Group 1
•
0 4 : location for the common user code for User Group 2
2. Common user codes
•
The Common User Code can be 4 to 8 digits long.
•
When a new Common User Code is entered and validated, the old one is replaced.
3. Validation
•
Press # key to confirm code entry.
Example
•
Set a Common User Code “1 3 5 7” for User Group 1: 0 3 1 3 5 7 #
•
To delete a Common User Code for User Group 1 from memory, key in the location number 0 3, followed by #: 0
3 #
User codes / cards for User Groups 1 & 2 (locations 10 & 20)
Locations Mode User ID Card/User code Validation
1 0 or 2 0 1 – 5 0 0 0 – 9 9 9 Card/user code entry #
1. Locations (User groups)
•
1 0 User Group 1: 1000 User codes / Cards for controlling User Group 1 channel
•
2 0 User Group 2: 100 User codes / Cards for controlling User Group 2 channel
2. Mode (Operation Mode)- see “ Security level of the operation media ” on page 13 for more information on the
security level of these modes
•
1 – Cards Only – 125Khz Proximity EM Card
5
cfr. “ DOOR SENS (Door Position Sensing Input – Normally Closed) ” on p. 11