Veichi JT550 Series, Руководство пользователя

Страница: 90 / 136

Chapter 7 Maintenance and Troubleshooting JT550 Series Inverter Manua l
- 90 -
F3.09 Output max.Freq of DO Range:0.01kHz~100.00kHz Default:50.00Hz
If the Y2/DO terminal is used for pulse output, this parameter is used to set the maximum frequency of
pulse output.
F3.10 AO1 offset coefficient Range:-100.0~+100.0 Default:0.0
F3.11 AO1 gain Range:-10.00~+10.00 Default:1.00
F3.12 AO2 offset coefficient Range:-100.0~+100.0 Default:0.0
F3.13 AO2 gain Range:-10.00~+10.00 Default:1.00
These four function parameters generally correct zero offset of analog output and output amplitude error.
They can also define required AO curve.
Zero offset coefficient 100% of AO1 and AO2 corresponds to 10 V or 20 mA. You can calculate
the gain and the zero offset coefficient from the following formulas:
% 100 *
max * ) 2 1 (
) 1 * 2 2 * 1 (
max * ) 2 1 (
max * ) 2 1 (
Y X X
Y X Y X
b
Y X X
X Y Y
K






For example, AO1 is used for output of frequency reference. To implement output of 2 V (Y1) at 0
Hz (x1) and output of 10 V (Y2) at 50 Hz (X2) according to the formulas, you can obtain gain and
zero offset coefficient as follows:
% 20 % 100 *
10 * ) 50 0 (
) 2 * 50 10 * 0 (
8 . 0
10 * ) 50 0 (
50 * ) 10 2 (



 


 b K
Then you can set F3.10 to 20 and set F3.11 to 0.8
In the formulas:
● "b" represents zero offset.
● "k" represents gain.
● "X" represents output frequency.
● "Y" represents actual output of the AO.
● " Xmax " represents max. output frequency (determined by F0-10).
● "Ymax" represents max. output 10 V or 20 mA.
AO output signal type and corresponding max. value are as follows:
AO output signal Corresponding Max. Output (Ymax)
Voltage 10 V
Current 20 mA
F3.14
Y1 switch-on delay
0.0s~3600.0s 0.0s
F3.15
Y1 switch-off delay
0.0s~3600.0s
0.0s
F3.16
Y2 switch-on delay
0.0s~3600.0s
0.0s
F3.17
Y2 switch-off delay
0.0s~3600.0s
0.0s
F3.18
R-relay switch-on delay
0.0s~3600.0s 0.0s
F3.19
R-relay switch-off delay
0.0s~3600.0s
0.0s
F3.20
E-relay switch-on delay
0.0s~3600.0s
0.0s
F3.21
E-relay switch-off delay
0.0s~3600.0s
0.0s
F3.22 Monopulse Output Time Y1 0.0s~30.0s 0.0s
F3.23 Monopulse Output Time Y2 0.0s~30.0s
0.0s
F3.24 Monopulse Output Time Relay R 0.0s~30.0s
0.0s
F3.25 Monopulse Output Time Relay E 0.0s~30.0s
0.0s
ON
OFF
Switch-on delay Switch-off delay
actual