15
Chapter 4: Functional Parameter Table
Here only simple parameter table. For details, pls read AC70 series manual or consult us.
“●”:Means that the parameter can be revised during frequency inverter in a running state.
“
〇
”:Means that the parameter can not be revised during frequency inverter in a running state.
“×”:Means that the parameters can only be read and can not be changed.
“–”:Means that the parameter is only set by the manufacturer.
“
※
”:Means that the parameter is related to the type of the frequency inverter
4.1 Basic parameter
Code
funcion
Fucntion name
Setting range and definition
Factary
default
pr
op
ert
y
Refer
to
page
Comm
unicati
on
code
E-00
Control method selection
0: Open loop vector control without
PG
1: V/F control mode
1
〇
69
100H
E-01
Running control command
chanel selection
0: Operator keypad
1: External terminal control
2: RS485 Communications port
control
0
〇
69
101H
E-02
Frequency reference given
main channel selection
0: Operator keypad digital given
1: Potentiometer of keypad
2: Terminal VS1 analog voltage 0-10V
3: Terminal AS analog current signal
4
～
20mA
4: Terminal VS2 analog voltage -10
～
10V
5: Pulse train signal
6: RS485 communication port
7: Up and Down control
8: General PID operation
9: Constant pressure PID control
10: Program running
11: Swing frequency run
12: Terminal selection:
1
〇
69
102H
