22
2 Loading or source exchange
Source loading and exchange • VEGASOURCE 31, 35
39155-EN-181126
•
Off position of the drive unit with padlock - secure switching func-
tion (1)
•
Remove padlock (3)
•
Remove the seal (4) from the strap with side cutting pliers and pull
out the seal wire
•
Loosen fixing screws (2) (3 pieces)
•
Lift up the complete drive unit upward
•
Loosen fixing screws (5) (3 pieces)
•
Detach the squared adaters with flange (11) upward
12
13
8
14
13
Fig. 19: Exchange of the source - source holder VEGASOURCE version M, N
8 Source holder
12 Slot
13 Source capsule
14 Spring ring
•
Unscrew source holder (8) with spanner (size 13) and pull it out of
the source container
•
Only when exchanging the source: Insert the blade of a screw-
driver (4 mm) into the slot (12) on the source holder (8) and press
out the source capsule (13) or unscrew the source capsule with a
screwdriver (2 mm). Let the source capsule (13) fall into a shielded
vessel
•
Insert the new source capsule (13) into the source holder (8) until
it snaps in or insert the spring ring (14) with the threaded version
and screw the source capsule into the source holder (8) (torque
2 ±0.5 Nm). Use a suitable gripping device or a manipulator for
inserting
•
Insert the source holder (8) completely into the source container
and screw in with a spanner (size 13)
•
Tighten the source holder (8)
•
Remove existing type labels (when exchanging the source)
Insert or exchange
source
Insert source holder
Attach or replace the type
labels
