17
2 Loading or source exchange
Source loading and exchange • VEGASOURCE 31, 35
39155-EN-181126
•
Tighten the source holder (5)
•
If necessary, remove extension rod (9)
•
Fold down the fixing strap (4)
•
Screw in the capstan screw (3) and tighten it
•
Fit the padlock (1) and lock
•
Tighten locking screw (2)
•
Secure capstan screw (3) with new seal
•
Remove existing type labels (when exchanging the source)
•
Unpack the type label set and letter it respectively. You can find
further information in chapter "
Safety instructions - Labelling
"
2
1
3
Fig. 14: Fasten type label
1 Adhesive label "Radioactive"
2 Type label - Source
3 Type label - source container (already on the source container)
•
Letter the type label (55 x 45 mm) and fasten it on the fixing strap
with four grooved pins
•
Attach the adhesive label "Radioactive" to the specified position of
the source container (if not already present)
•
Insertion or exchange of the source is finished
Attach or replace the type
labels
