12
2 Loading or source exchange
Source loading and exchange • VEGASOURCE 31, 35
39155-EN-181126
2.3 Version C
1
8
4
2
3
7
6
8
9
5
Fig. 9: Exchange of the source - VEGASOURCE version C
1 Padlock
2 Locking screw
3 Retaining pin
4 Capstan screw
5 Safety bolt - Source capsule (optional)
6 Cover plate
7 Source capsule
8 Source holder
9 Extension rod M8 (optional)
You need the following tools when exchanging the source on version
C:
•
Key for padlock
•
Hexagon spanner, size 5
•
Allen key, size 2.5 (optional)
•
Flat-headed screwdriver, size 1.5 x 10
•
Side cutters
•
Gripper tool or manipulator for source capsule
•
Possibly extension rod M8
•
Remove padlock (1)
•
Loosen locking screw (2) with a flat head screwdriver 1.5 x 10
•
Remove the seal between holding pin (3) and capstan screw (4)
with side cutting pliers and pull out the seal wire
•
Unscrew the capstan screw (4) with a flat headed screwdriver, size
1.5 x 10
•
Insert the holding pin (3) and slide the stirrup over the pin
•
Bring the stirrup to the extraction position
Required tools
Remove source holder
