Vega vegaflex 83 Скачать руководство пользователя страница 11

Страница: 11 / 80

3 Product description

VEGAFLEX 83 • 4 … 20 mA/HART - two-wire

41834-EN-120726

It is suitable for measured value indication and adjustment of plics

sensors and is connected to the sensor with a four-wire standard

cable up to 50 m long.
You can find further information in the operating instructions "

GADIS 61

" (Document-ID 27720).

VEGADIS 62 is suitable for measured value indication and adjustment

of sensors with HART protocol. It is looped into the 4 … 20 mA/HART

signal cable.
You can find further information in the operating instructions "

GADIS 62

" (Document-ID 36469).

The PLICSMOBILE T61 is an external GSM/GPRS radio unit for

transmission of measured values and for remote parameter adjust-

ment of plics

sensors. The adjustment is carried out via PACTware/

DTM by using the integrated USB connection.
You can find further information in the supplementary instructions

PLICSMOBILE T61

" (Document-ID 36849).

The protective cover protects the sensor housing against soiling and

intense heat from solar radiation.
You will find additional information in the supplementary instructions

manual "

Protective cover

" (Document-ID 34296).

Screwed flanges are available in different versions according to the

following standards: DIN 2501, EN 1092-1, ANSI B 16.5, JIS B 2210-

1984, GOST 12821-80.
You can find additional information in the supplementary instructions

manual "

Flanges according to DIN-EN-ASME-JIS

" (Document-ID

31088).

The electronics module VEGAFLEX series 80 is a replacement part

for TDR sensors of VEGAFLEX series 80. There is a different version

available for each type of signal output.
You can find further information in the operating instructions manual

Electronics module VEGAFLEX series 80

The indicating and adjustment module can be optionally replaced by

an indicating and adjustment module with heating function.
You can hence use the indicating and adjustment module in a tem-

perature range of -40 … 70 °C.
You can find further information in the operating instructions "

Indicat-

ing and adjustment module with heating

" (Document-ID 31708).

If you are using an instrument with rod version, you can extend the

rod probe individually with rod extensions of different lengths.
The following lengths are available:

•

100 mm

•

200 mm

•

500 mm

External indicating and

adjustment unit with

HART protocol

External radio unit

Protective cover

Flanges

Electronics module

Indicating and adjust-

ment module with heating

Rod extension

Содержание vegaflex 83

















































































Результаты поиска

Содержание vegaflex 83

Отзывы:

Бренды по названию

Популярные бренды

Vega vegaflex 83, Руководство по эксплуатации

Результаты поиска

Содержание vegaflex 83

Отзывы:

Бренды по названию

Популярные бренды