Analysis:
ON
Auto-Freeze:
OFF (user can optionally have it on, but it makes the scoping process slower).
Rects/Dots:
User’s personal choice unless directed. Dots setting is default.
Shake:
OFF
5.
MPO mode
changes the fields in
Page2 setup mode
to the MPO equivalent
Analysis parameters:
Either
PC, SM RL
≥
45 dB; APC, SM;
or
PC
,
MM
is chosen. Since there is only MPO UPC, RL
≥
25 dB is not
used.
Tip Type:
MPO UPC (some APC):
multifiber ultra-polish connectors and some angled polish connector brands.
MPO APC:
multifiber angled-polish connectors (most cases)
For
MPO MM
, select
MPO UPC (some APC)
and
MM, PC
on the analysis parameters.
6. Navigate back to the
Capture
tab and press
Resume
if not already enabled. The video stream feed of the scope is activated.
Active MPO inspection scoping screen - Fully adjusted zoom and orientation
TX300s_Platform_Manual_RevB01
Page 84 of 123
Содержание VePAL TX320s
Страница 1: ......
Страница 71: ...WiFi Wiz Connect IP Go back to TOC TX300s_Platform_Manual_RevB01 Page 71 of 123...
Страница 73: ...ARP Wiz Result Go back to TOC TX300s_Platform_Manual_RevB01 Page 73 of 123...
Страница 82: ...Result tab Tree structure file storage TX300s_Platform_Manual_RevB01 Page 82 of 123...
