VeEX VePAL TX320s, Руководство пользователя

Страница: 79 / 123

Resume: Turns on or stops the video capture feed of the fiberscope.
Analysis On/Off:
a toggle switch function to turn on/off the Pass/Fail threshold concentric rings (yellow) defined by IEC 61300-3-35 standard.
Auto Freeze On/Off : a toggle switch function when the image is fully focused, will automatically pause the video/frame capture.
Dots/Rects : a toggle switch function that highlights areas of contamination/defects with boxes (rectangles) or dots (contour shape) based on
requirements and/or personal preference.
Dots function highlighting overlay
Rects function highlighting overlay
Shake : a toggle switched, self-corrective function to minimize significant vibrations and unsteadiness generated from the user holding the
fiberscope, usually performed when scoping bulkhead/female connectors.Typically, users may not always need this function (image focusing
was good enough).
MPO mode On/Off : a toggle switch function to enable multi-fiber connector endface analysis.
Single Fiber Workflow Setup :
1. In the Setup tab , the user can define the following fields: Auto Save functionality (Disabled, Save when auto freeze, Save upon
tap) , Job ID , Cable ID , Fiber ID , Test ID , and Increment in the first page screen to define a unique identifier and saving results
structure, <- Page 1/2 ->.
a. Optionally, the autosave function can be disabled in favor of manual saving. Manual saving is done in the Results tab
and pressing the Save button after the user has finished inspecting a fiber endface.
TX300s_Platform_Manual_RevB01 Page 79 of 123