VeEX VePAL TX320s, Руководство пользователя

Страница: 112 / 123

Products support USB wireless adaptors supplied by VeEX only and have the necessary software driver built into the test set.
The WiFi InSSider supports 2.4GHz and 5.0GHz Bands. The home screen has tabs to display test results for both frequency bands and also
for graphical presentation of results for both.
2. Tap the Scan button on the right side of the screen.
After the scan is completed, the unit displays the list of access points (AP) detected in the 2.4 GHz and 5GHz bands.
The following information is displayed for each AP:
SSID name of the AP
BSSID (MAC address) of the AP
802.11 protocol version supported by the AP
Max data rate supported by the AP
AP's radio channel number
Lock symbol indicates if security is set on the AP (WEP, WPA or WPA2).
When the AP is unsecured, no lock symbol is displayed
Signal strength of the AP
Access Points in the 5.0GHz spectrum can only be displayed if the VeEX USB Wifi adapter supports 802.11a/n or 802.11 a/n/ac. Refer to the
USB Wifi adapter specifications.
3. Use the 2.4GHz GraphCH and 5.0GraphCH tabs to view the number of Access Points detected for each channel in the 2.4GHz and 5GHz
bands and the strength of the strongest AP's signal for each channel.
2.4GHZ Channel
5GHZ Channel
4. Tap the
Graph
tab of the respective Channel to view the results in a graphical presentation.
TX300s_Platform_Manual_RevB01 Page 112 of 123