VeEX VePAL TX320s, Руководство пользователя

Страница: 100 / 123

Supported wavelengths on FX45 OLTS (1310/1550) configuration
Lasers: Select a calibrated wavelength from the dropdown list to transmit light energy. Available lasers wavelengths dependent on
FX4x/FX8x optical loss test set (OLS + OPM) configuration.
CW: Continuous Wave mode. The light source is 100% duty cycle (100% transmitting)
270 Hz, 1000 Hz, 2000 Hz: different modulation frequencies generated for varied fiber cable identification with a live fiber identifier.
Turn On/Turn Off: function that switches the light source ON and OFF,
Loop:
a function that will cycle the transmitted wavelength supported by the testset for a short time in sequence, For example, 1310 nm for
some time, than 1550 nm for some time, and back to 1310 nm next and the cycle repeats until deactivated.
Table Tab (sometimes optional)
This section servers as an intermediary, temporary results list for users to view a high-level perspective of the power measurements that they
have accumulated from pressing the “ Acquire ” button in OPM Home mode. When the measurements are check-marked, the user can either
press Save or Delete to permanently write data to the Results tab or permanently remove from the current list. If the user tries exits the
application without saving, a notification will prompt the user about the app running giving the choice to proceed exiting without saving results
or remaining as is.
Users can use this function to organize/filter their results in project batches, so that the correct set of results are grouped together
appropriately.
Logged power measurements listed after pressing Acquire multiple times
TX300s_Platform_Manual_RevB01 Page 100 of 123