7.4 ARP Wiz
ARP Wiz uses the Address Resolution Protocol (ARP) to verify the status of each IP address in a user-selectable IP range. ARP is
the standard method for finding a host's hardware address when only its network layer address is known. In other words, ARP is
used primarily to translate IP addresses to Ethernet MAC addresses. ARP is defined in
Setup
Configure the following parameters:
Profile:
Drop-down selections are Default, Delete, Save, or Save As...
Start IP:
Starting IP Address
End IP:
Ending IP Address
Time Out(s):
Range from 1-99 seconds. Input using the numeric keypad
Press
Start
.
The test will continue to run until the user presses
Stop
. A finished status indication will display when the test finishes.
ARP Wiz Setup
Result
The MAC addresses associated with active IP addresses in the range are displayed. If no MAC address is associated with the IP
address, a
FAILED
status is displayed.
ARP Wiz uses the ARP protocol abd can only work within the same subnet as the IP address provided to the test set in IP
Status.
TX300s_Platform_Manual_RevB01
Page 72 of 123
Содержание VePAL TX320s
Страница 1: ......
Страница 71: ...WiFi Wiz Connect IP Go back to TOC TX300s_Platform_Manual_RevB01 Page 71 of 123...
Страница 73: ...ARP Wiz Result Go back to TOC TX300s_Platform_Manual_RevB01 Page 73 of 123...
Страница 82: ...Result tab Tree structure file storage TX300s_Platform_Manual_RevB01 Page 82 of 123...