VeEX VePal CX350, Руководство пользователя

Страница: 72 / 81

11.0 Setup - Main Menu
This menu contains CX350 related system operation and parameter settings:
Channel Table
Default Location
CM SNR
To turn Cable Modem SNR measurement results On or Off. When turned On, the Cable Modem’s SNR
measurement results will be displayed and saved.
Unit
To change the display unit between dBmV and dBuV
TP Compensation
To turn the Test Point (TP) compensation On or Off. User is able to edit and create, by name, of test point locations
and the associated compensation value to be added to the level measurement results.
Table Lock
To lock the channel table to prevent accidentally erasing of pre-stored channel tables
Sweep table (RP)
To edit and create return path sweep tables
Remote View Mode
To select between Controller or Responder mode for remote operation..
Responder IP Port
To select the method/port for IP connection in responder mode.
The selections are: Management port, Cable Modem, Bluetooth, Data Card, and WiFi.
For remote installation, the management port with static IP address is recommended so that in case of power
failure or upon system reset, the CX350 will be able to reconnect to the internet automatically.
Responder Mode
When Manual mode is selected, upon power up or system reset, the CX350 will not attempt to reconnect to the IP
network and act in its normal operation mode.
When Auto mode is selected, the CX350 will attempt to reconnect to the IP network and acts in responder mode.
CSO-1, 2, 3, 4 offsets
CTB offset
Co-ax Vp
For future TDR option use
Diplexer Frequency
To select the return path cut-off frequency of the built-in amplifier. The frequency is 42MHz for an Annex B system
and 65MHz for an Annex A system.
OFDM Table
To create and edit OFDM channel table.
Setup - Main Menu
CX350 e-Manual D07-00-037 RevC01 Page 72 of 81