VeEX OTDR FX150+ Series, Руководство пользователя

Страница: 83 / 109

OTDR Series e-Manual, D07-00- 076P -RevD00 Page 83 of 109
Use Up/Down arrows to navigate the event table and to display or move to the highlighted
event.
Use the green left/right arrows to move the marker between the start and end of fiber being
tested.
To maximize the Event table, select the cross symbol again.
7.6.2 Event Types
The Event is color coded depending on Threshold settings defined in the test setup (see
7.2
Thresholds (OTDR Setup page 2)
.
•
Red indicates the event fails or exceeds the Pass threshold criteria.
• Green indicates the event passes the Fail threshold criteria.
7.6.3 Event Editing
Adding events:
1. Ensure the Trace view is active.
2. Position marker at the point where a new event will be inserted. You can use the Left/Right
rubber keys to position the marker more precisely, if needed.
3. Press the
Add
button on the right sidebar. A new event number will appear on the trace
and in the event table.
4. Select the new event in the event table and click the Modify button in the right sidebar.
Position the splice loss markers to measure the new event accurately. Once markers are
positioned, click the Accept button.