VeEX OTDR FX150+ Series Скачать руководство пользователя страница 58

Страница: 58 / 109

OTDR Series

e-Manual, D07-00-

076P

-RevD00

Page 58 of 109

6.11 Optical Power Meter (OPM)

The unit can be equipped with an optionally built-in Optical Power Meter (OPM). It can also

access an external Optical Power Meter using the Micro-USB port. It works by testing average

output power from a light source and can be used to measure the span loss in dB of an optical

fiber systems. On the test set display, view measurement loss in real-time.

Note: Only optical power meters (e.g. Built-in, UPM-100 or FX40 series meters) approved by

VeEX are supported.

To see the most recent OPM specifications, go

www.veexinc.com

Use the

Home

icon to get to the Fiber Main Menu (OTDR, VFL, OLS, OPM test modes)

Accessing the Optical Power Meter module shuts down GPS and the

atomic service.

6.11.1 Access the OPM

To access the internal (built-in) OPM:

1. Connect the test fiber to the OPM test port located at the top of the test unit.
2. Tap the

icon to close OTDR mode. The

Fiber main menu

appears.

3. Press

Optical Power Meter

on the main menu. The

OPM

screen appears with the

Caution

warning.

See

6.11.2

Using the built-in OPM

for information on using the built-in OPM.

To access the externally connected OPM:

1. Make sure the external Optical Power Meter is connected to the Micro-USB port via an

OTG cable.

2. Power on the external meter, and then tap the

icon to close OTDR mode. The

Fiber

main menu

appears.

3. Press

Optical Power Meter

on the main menu. The

External OLTS device(s) found

screen appears.

Содержание OTDR FX150+ Series














































































































Результаты поиска

Содержание OTDR FX150+ Series

Отзывы:

Похожие инструкции для OTDR FX150+ Series

Бренды по названию

Популярные бренды

VeEX OTDR FX150+ Series, Руководство пользователя

Результаты поиска

Содержание OTDR FX150+ Series

Отзывы:

Похожие инструкции для OTDR FX150+ Series

Бренды по названию

Популярные бренды