VeEX MTTplus Скачать руководство пользователя страница 50

Страница: 50 / 66

MMF/SMF:

Selects the type of connector/fiber to be analyzed and loads the correct Pass/Fail mask. Please note that the label in the

button DOES NOT indicate the current mask type. It indicates that the mask would be changed to if activated.

Shake ON/OFF:

Turning the Shake ON may help in situations when the image is not very stable, such as inspecting a female

connector or bulkhead.

7.4.1.8 Captured Files Tab

This section of the user interface lists all the connectors’ end face images that have been captured with the fiber inspection

microscope. Users can and “Before” and “After” identifiers or remainders when comparing images before or after cleaning or polishing.

Clear All:

Deletes all the image files in the Captured Files list

Delete:

Deletes any selected files from the Captured Files list. Use the check-boxes to select

Compare:

Compares two images, for example, ones taken before and after cleaning. Use the check-boxes to select any two image

files and then tap on the Compare soft button. Use the Change Mode button on the comparison window to enable and disable the

analysis overlay.

MTTplus e_Manual D07-00-096P RevA00

Page 50 of 66

Содержание MTTplus



































































Результаты поиска

Содержание MTTplus

Отзывы:

Похожие инструкции для MTTplus

Бренды по названию

Популярные бренды

VeEX MTTplus, Руководство пользователя

Результаты поиска

Содержание MTTplus

Отзывы:

Похожие инструкции для MTTplus

Бренды по названию

Популярные бренды