VeEX MTTplus, Руководство пользователя

Страница: 59 / 66

Press the
Dial Up
key.
In the IP Tools Setup menu, the Port will be displayed as "Datacard Port." The D for Data icon in the bar on the lower end of the
screen will have a red cross to show that datacard is not connected - .
Select the
configuration parameters
, then press
Connect
.
Now that a connection has been established:
The
D
for Data in the icon turns green .
The connection details are displayed in the IP Tools Status tab (shown below)
It will automatically reconnect if the test set is powered off/on and you are in a good reception area
It will automatically reconnect if you enter a bad cell area and return to a good one
MTTplus e_Manual D07-00-096P RevA00 Page 59 of 66