background image

Warranty

TLS-350R, TLS-350 PLUS, TLS-350J AND TLS-300I/C MONITORING SYSTEMS

We warrant that this product shall be free from defects in material and workmanship for a period of one (1) year from the date of
installation or twenty-four (24 months) from the date of invoice, whichever occurs first. During the warranty period, we or our
representative will repair or replace the product, if determined by us to be defective, at the location where the product is in use
and at no charge to the purchaser. LAMPS, FUSES, AND LITHIUM BATTERIES ARE NOT COVERED UNDER THIS
WARRANTY.

We shall not be responsible for any expenses incurred by the user.

This warranty applies only when the product is installed in accordance with Veeder-Root’s specifications, and a Warranty
Registration and Checkout Form has been filed with Veeder-Root by an authorized Veeder-Root Distributor. This warranty will not
apply to any product which has been subjected to misuse, negligence, accidents, systems that are misapplied or are not installed
per Veeder-Root specifications, modified or repaired by unauthorized persons, or damage related to acts of God.

If “Warranty” is purchased as part of the Fuel Management Service, Veeder-Root will maintain the equipment for the life of the
contract in accordance with the written warranty provided with the equipment. A Veeder-Root Fuel Management Services
Contractor shall have free site access during Customer’s regular working hours to work on the equipment. Veeder-Root has no
obligation to monitor federal, state or local laws, or modify the equipment based on developments or changes in such laws.

MODULES, KITS, OTHER COMPONENTS (PARTS PURCHASED SEPARATE OF A COMPLETE CONSOLE)

We warrant that this product, exclusive of lithium batteries, shall be free from defects in material and workmanship for
a period of fifteen (15) months from date of invoice. We warrant that the lithium batteries shall be free from defects
in material and workmanship for a period of 90 days from date of invoice. We will repair or replace the product if the
product is returned to us; transportation prepaid, within the warranty period, and is determined by us to be defective.
This warranty will not apply to any product which has been subjected to misuse, negligence, accidents, systems that
are misapplied or are not installed per Veeder-Root specifications, modified or repaired by unauthorized persons, or
damage related to acts of God. 

We shall not be responsible for any expenses incurred by the user. 

MAG-XL FLEX PROBE

The same warranty policies for the MAG Plus Rigid Probe apply to MAG-XL Flex Probe. When the Probe is
purchased with a monitoring system (console), the warranty period is one (1) year from the date of installation or
twenty-four (24) months from the invoice date, whichever occurs first. Parts and labor are covered in this warranty.
When the Probe is purchased individually, it has a 15-month parts only warranty from the invoice date. Please refer
to the Policies and Literature section in the Price Book. 

Veeder-Root will not warranty the probe if its damage is caused by failing to follow the Veeder-Root MAG-XL
Installation & Setup Manual (577013-972). Each MAG-XL Flex Probe is made to order, and therefore cannot be
returned for credit.

Содержание TLS-350R PLUS







































Отзывы: