Mag-FLEX Installation And Handling Procedure
Mag-FLEX Probe Installation
17
6.
Feeding the probe into the tank
7.
Corrugated shaft lowered into tank
8. Installation dimension
With the probe in contact with the tank bottom & the probe held taut measure the clearance from the lower
edge of the probe canister to the top of the tank entry point (installation dimension) record this measurement.
Unroll the corrugated shaft as the probe is
lowered into the tank taking care to avoid
chafing on the tank entry.
Steel Tanks
At this point lower the probe slowly until
you feel the magnetic attraction as it con
-
tacts the bottom of the tank.
Non Steel tanks
Lower the probe until you feel the weight
contact the tank bottom.
1m
Record
measurement
Содержание Mag-FLEX
Страница 1: ...Manual No 577014 038 Revision C Installation Manual EU Version Mag FLEX Probe...
Страница 31: ......