Appendix A
TLS-450PLUS Software Upgrade Procedure
A-8
TLS-450PLUS Software Upgrade Procedure
1. Insert the Software Maintenance thumb drive into one of the two USB ports (console Comm bay, slot 5).
2. Navigate to the
Menu>Software Maintenance>Download
screen.
3. Touch the Download Source down arrow and select the thumb drive. Notice the Version field displays new
software version.
4. Touch the
Download
button to begin the software download.
5. After successful completion of the download (approximately 30 minutes), the ‘Download Completed’ message
appears.
6. Navigate to the
Menu>Software Maintenance>Activate/Revert
screen. Notice the Current version and
Available (downloaded) version are displayed.
IMPORTANT! During feature activation, which only takes a few minutes, there must be no dispensing.
7. Touch the box beside the message ‘Click to acknowledge the system will be stopped.’
8. Touch the
Activate
button to overwrite the Current of software with the Available (just downloaded) version of
software.
9. The Confirmation Needed dialog box displays. Touch the
button to confirm and activate the new software, or
touch the X button to cancel the activation.
TLS-450PLUS RJ IQ Monitoring Feature Installation Procedure
IMPORTANT! During feature activation, which only takes a few minutes, there must be no dispensing.
1. Insert the USB Adapter and upgrade I-button from the upgrade kit. Remove the plastic end cap from the USB
Adapter.
2. Plug the USB Adapter into one of the two USB ports in the console Comm bay (slot 5).
3. Navigate to the
Menu>Software Maintenance>Upgrade Features
screen.
4. The screen displays the feature which are available to be activated, e.g.,
Intelligent Pump Control
.
Select
the box beside the desired feature.
5. Touch the
Install Feature
button to start the installation process.
6. The current status of the feature install displays:
- Activation in Progress
7. When you have completed the upgrade features procedure remove the upgrade thumb drive.
8. From the Home Screen, touch the following
Menu > Overview > About
and verify that the features in the
upgrade were installed.
9. With the new software version and feature installed perform a system backup onto the site’s V-R Backup
thumb drive.